Yearndoll Hole Cleaner for Love Dolls, Cleans, Disinfects, and Drys Lower Body

Love Doll Cleaning Product Instructions

WARNING: This product is a silicone love doll vaginal irrigator and is prohibited from being used for human body cleaning. Sterilization lamps are harmful to the human body and can only be used to sterilize the inside of the love doll’s vagina. If light leaks during use, it is harmful to humans, animals, and plants. If light leaks during use, it is unavoidable. Please shield the light source with a light-shielding object and do not expose it directly to the human body, animals, and plants.

Video display of use here:

[Product name] : Love doll cleaning set

[Model specifications] : LLD-G 001,

[Package contents] : 1 automatic cleaner, 1 powered sterilizer stick, 2 suction sticks, instruction manual, charging cable, suction hose, medicine and cleaning solution are not included, and the product is non-sterile.

[Scope of application] : Used to cleanse and disinfect the vagina of love dolls after use.

[Applicable people] : Love doll owners

【Product Features】 :

Before use, insert the rotating rod into the washer body and press it down along the notches. After use, pull it out vertically.

1. Press the button on the product for 2 seconds to turn it on. If the power indicator flashes after turning it on, it indicates that the power is insufficient. Please charge the product before use.

2. To charge, simply attach the magnetic end of the charging cable to the two metal points on the product handle and insert the USB end into a mobile phone charger. Charging voltage: 5V, current: 500mA, battery capacity: 1200mAh, battery voltage: 3.7V. It will be fully charged in about 3 hours.

3. Once charged, it can be used for 8 months on standby and about 50 times. Since the charging frequency is low, please store the charging cable properly.

4. If the button is damaged or water gets in, stop using the product immediately.

5. If powered on and not used, it will automatically turn off after 3 minutes.

6. When the water temperature exceeds 40 degrees, the water temperature lamp will change from green to red. There will be a delay in the temperature display, so please use the perceived temperature as a reference.

7. Press the cleaning button to start timing. A red light will appear within 1 minute, and after cleaning for more than 1 minute, the light will turn green. After cleaning for 1 minute, it will automatically stop.

8. The first time you press the button below the product, it will start the pumping and cleaning mode. Press it a second time to turn on the rotation function and automatically stop after a total of 65 seconds of forward and reverse rotation. Press it a third time to stop the pumping and rotation functions.

9. Press and hold the button on the bottom of the product to enter manual mode. The product will continue to operate, and release the button to stop operation. When powered on, the noise is loud when no water is being drawn in, and quiet after water is drawn in.

10. Before using the sterilization rod, please prepare a Type_C interface mobile phone charging cable. The USB end can be connected to a mobile battery or mobile phone, and the voltage can be input at 5V.

11. First, insert the glass part of the sterilization lamp into the vagina of the love doll. Then, turn on the sterilization lamp. After turning on the power, the sterilization lamp will light up directly and begin sterilization.

12. The sterilization lamp is an ultraviolet disinfection sterilization, and the sterilization effect is achieved 30 minutes after the sterilization lamp is turned on.

13. When using the sterilization lamp, a temperature of around 40 degrees is generated inside the vagina of the love doll, and even if you use the love doll immediately after sterilization is complete, there will be no side effects on the body.

14. Sterilization is complete. Turn off the power and remove the sterilization rod from the vagina.

15. After sterilization, the absorbent stick can be inserted into the vagina to absorb excess moisture.

16. The absorbent sticks can be reused. If you want to reuse them, simply remove the absorbent stick after absorbing the water and let it dry naturally.

[Contraindications, precautions, warnings and information] :

1. All products in this set are prohibited for use on human body.

2. If the inside of the vagina is dry, please use human lubricant, otherwise it may not be possible to rotate.

3. Please use drinking water. Bottled pure water or warm water is best. If the product absorbs foreign matter, the product will malfunction and malfunction due to the absorption of foreign matter is not guaranteed. Examples of foreign matter include, but are not limited to, hair strands, clumps of limescale, etc.

4. Bring a water container with you when using it. We recommend a container with a capacity of 1.5 liters.

5. The cleaning water temperature should not exceed 40°C. The temperature information is for reference only and should be based on the perceived temperature. Please be careful not to get burned. The maximum temperature resistance of the product pump is 80°C and should not exceed this.

6. If any malfunction occurs during use of the product, stop using it immediately and contact customer service or after-sales service personnel immediately.

7. When using the sterilization lamp, direct irradiation of the human body and living animals and plants is prohibited.

8. The sterilization rod transparent tube is a special glass tube, so it is strictly forbidden to hit it. If the glass tube breaks, stop using it. Please be careful as glass fragments may cause personal injury.

9. After use, water may accumulate in the vagina occasionally, so insert an absorbent fiber stick.

[Ultraviolet sterilization principle]

Ultraviolet light primarily kills microorganisms, such as bacteria, viruses, and spores, through radiation damage and nucleic acid destruction, thereby achieving the purpose of sterilization. The action of ultraviolet light on nucleic acids can cause bond and chain scission, cross-linking, and the formation of photoproducts, thereby altering the biological activity of DNA and preventing microorganisms from replicating themselves. Experiments have shown that odors inside the vagina of love dolls disappear after sterilization. This sterilization rod has a sterilization efficiency of over 99.9%. Even if the inside of a love doll’s vagina is moist after sterilization, no odor will be generated.

[Interpretation of product labels and packaging]

[How to use]:

1. Fill a container with hot water or cleaning solution, insert the silicone hose into the interface at the bottom of the cleaner, and then place the end of the gravity ball into the water.

2. Check that the water temperature is appropriate, as backflow during rinsing can cause burns.

3. When cleaning, insert the rotating part of the cleaner into the love doll’s vagina, then hold the vaginal cleaner in your hand, pick up the handle, angle the silicone cleaning headband upwards, align the silicone cleaning head with the vaginal opening, and insert it into the vagina, then press the cleaning switch, the cleaner will first absorb water and then rotate again, rinsing clockwise and counterclockwise, and the rinse will be completed in a total of 65 seconds.

【Product storage and maintenance method】:

1. After use, if the straw does not come into contact with water, turn on the power and start draining. Once the water has been drained, remove the straw and store it.

2. Clean the silicone parts with toothpaste as usual, and then purchase medical alcohol and spray it on the silicone parts to sterilize them.

3. Although the product is waterproof, it is prohibited to pour water into the entire machine or boil water in the entire machine.

4. The product uses ultrasonic sealing technology, so if it is dropped, the main body may be damaged and water may penetrate.

5. After use, dry it and store it in the storage bag. Before storing it for a long time, shake it lightly to remove any excess water in the tube and then dry it.